Activated Alumina for HCL adsorption

Products introduction:

KS-104A In the petrochemical production process, chlorine in the raw gas can cause various catalysts and the adsorbent is poisoned, making the adsorbent and catalytic performance ineffective, and the presence of chlorine will seriously corrode devices and equipment.

Affect the normal operation of production, so chlorine must be removed, usually using solid dechlorination agent to remove raw gas in chlorides. KS-104A type high-efficiency dechlorination has the advantages of wide use temperature range, uniform high and low temperature activity, resistance to

It has the characteristics of good water resistance, active components and chlorine after the reaction are not easy to migrate, and can be used for dehydrochlorination of syngas and protecting catalysts and adsorbents, it can also be widely used in naphtha, natural gas, H 2 , N 2 , NH 3 , CO,Raw materials such as CO 2 can be dechlorinated.

There is usually a large amount of HCl in the liquid phase naphtha reformate, which will affect the operation of the subsequent equipment.

KS-104A can continue to work in any temperature environment, adsorb HCl, and can continuously adsorb HCl

Typical Chemical Composition (%) Al2O3 + surface modifier (inorganic, non-toxic) 93.5

Technical Data Sheet

Conditions of use：

Operating temperature 5-400℃

Working pressure: normal pressure - 0.8mpa

Airspeed 1000-3000 - h - 1

the ratio of height and diameter(H/D)≥3

Chlorine release rate ≥99.9%

Welcome to contact us freely